MPC852TVR50A Microprocessors MPU Ethernet 50 MHz Ethernet I2C SPI UART USB

Product Description

MPC852TVR50A high quality Microprocessors MPU Ethernet 50 MHz Ethernet I2C SPI UART USB

Features

The following list summarizes the key MPC852T features:

• Embedded MPC8xx core up to 100 MHz

• Maximum frequency operation of the external bus is 66 MHz

— The 100MHz/80MHz core frequencies support 2:1 mode only

— The 50MHz/66MHz core frequencies support both 1:1 and 2:1 modes

• Single-issue, 32-bit core (compatible with the PowerPC architecture definition) with 32, 32-bit general-purpose registers (GPRs)

— The core performs branch prediction with conditional prefetch, without conditional execution

— 4-Kbyte data cache and 4-Kbyte instruction cache

– 4-Kbyte instruction cache is two-way, set-associative with 128 sets

– 4-Kbyte data cache is two-way, set-associative with 128 sets

– Cache coherency for both instruction and data caches is maintained on 128-bit (4-word) cache blocks

– Caches are physically addressed, implement a least recently used (LRU) replacement algorithm, and are lockable on a cache block basis

— MMUs with 32-entry TLB, fully associative instruction and data TLBs

— MMUs support multiple page sizes of 4, 16, and 512 Kbytes, and 8 Mbytes; 16 virtual address spaces and 16 protection groups

• Up to 32-bit data bus (dynamic bus sizing for 8, 16, and 32 bits)

• 32 address lines

• Memory controller (eight banks)

— Contains complete dynamic RAM (DRAM) controller

— Each bank can be a chip select or RAS to support a DRAM bank

— Up to 30 wait states programmable per memory bank

— Glueless interface to DRAM, SIMMS, SRAM, EPROMs, flash EPROMs, and other memory devices

— DRAM controller programmable to support most size and speed memory interfaces

— Four CAS lines, four WE lines, one OE line

— Boot chip-select available at reset (options for 8-, 16-, or 32-bit memory)

— Variable block sizes (32 Kbyte–256 Mbyte)

— Selectable write protection

— On-chip bus arbitration logic

• Fast Ethernet controller (FEC)

• General-purpose timers

— Two 16-bit timers or one 32-bit timer

— Gate mode can enable/disable counting

— Interrupt can be masked on reference match and event capture

• System integration unit (SIU)

— Bus monitor

— Software watchdog